|
Wed, Aug 17, 11 at 16:37
| My garage door opener had issues opening up with remote or push button. I then changed the lever to use in manual mode and now it is stuck in manual mode. While I try to push the lock back to change it to automatic it won't allow me. It seems like the lock is not moving away/back from its position.
What do I do to fix? Thanks. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Wed, Aug 17, 11 at 18:00
| I guess you mean the lever that releases the door from the opener. What is the make and model number of your opener. There are several. |
|
- Posted by dallasuser (My Page) on Thu, Aug 18, 11 at 10:39
| Yes, it is the lever that releases the door. The make is Genie Excelerator Series II. I bought it at Lowes about 8 years ago. Hope this helps. |
|
- Posted by don_1_2006 (My Page) on Thu, Aug 18, 11 at 11:29
| On Genies with no clutch nut coming out of the back of the motor head, there is a small plastic coupler that connects the screw assembly to the main power head. To check and replace that part, remove the two screws holding the rail to the main power head. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.