Return to the Garages/Workshops Forum | Post a Follow-Up

Craftsman 1/2 hp blinks 3 times and not working

Posted by edbish (My Page) on
Sun, Aug 6, 06 at 16:01

Help! We lost power and now the keypad and indoor pad don't work. I reset the the entire unit. All the remotes work but the unit continually blinks 3 times. Anyone have any suggestions? Thanks

Follow-Up Postings:

RE: Craftsman 1/2 hp blinks 3 times and not working

The LED flashing 3 times is the code for a shorted wall switch. You can try removing the wires that go to it at the motor unit. They are connected to terminals 1 and 2. One of the wires has a red tracer. That is the one on terminal 1.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here