|
Wed, Aug 8, 07 at 15:26
| Though the GDO functions fine, the trip sensor no longer turns on the lights. I tried replacing what i thought were dead bulbs but...no go. One of the just replaced sensors has an amber light. Realign? or replace?
Thanks |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Wed, Aug 8, 07 at 16:43
| Try holding in the light button on your wall control for 10 seconds. This should toggle this function on and off. |
|
| Thank you. Doing what you suggested and finding the manual in my highly efficient filing system gave me a few more ideas that finally worked. It seems that some of the new energy efficient light bulbs have a non standard base that will thread into the sockets but never make contact. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.