|
Sat, Aug 19, 06 at 14:38
| I had to replace the sensors and wires but now I don't remember how they were wired to the unit. There are 3 contacts on the unit numbered 1 to 3. I tried everything but can't get it to work. I got a steady green light on the sender sensor and flashing one on the receiver, tried to align the sensors but the receiver keeps flashing. Can someone tell me which wire goes where? Thank you.
Luc100 |
Follow-Up Postings:
|
| The white wires go to terminal 2 and the white wires with black tracer go to terminal 3. If the receiving unit is blinking they are probably not aligned properly. Keep tweaking them. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.