|
Sat, Aug 6, 11 at 14:06
| I have Craftman Garage Door Opener model 139.53914D. The battery on keyless entry pad died. I replace the 9V battery and programme the entry code and worked fine for a week and keyless entry pad stopped working.(Garage door will still open and close with wall Premium control console). I replace the battery again. Inpite of repeated tries now I am not able to programme code on keyless entry pad and not able to use keyless entry pad. Two motion sensor lights at the bottom of the door are in alignment and both lights are on.
Can anyone help me, how do I programme keyless entry pad? Thanks, |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Aug 8, 11 at 10:16
| Locate the smart/learn button on the rear of the motor unit near where all those white wires go. Press and immediately release this and then walk over to the keypad and key in any 4 digit code you like and press enter. If this doesn't work your keypad has failed. |
|
| I alredy tried this and still it doesn't work. I will try replacing keypad. Thanks, |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.