|
Sun, Aug 5, 07 at 13:41
| Recently installed a Chamberlain door opener with a 935CB door control unit. Everything worked fine.I then added a second 935CB primarly to provide motion dection at a second side dooor. Problem is all functions on second unit works fine except for motion detector. It will not trigger the opener lights.
Thanks in advance |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Sun, Aug 5, 07 at 15:28
| You might call Chamberlain technical service at 1-800-528-5880 and see if they will help with your question. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.