Return to the Garages/Workshops Forum
| Post a Follow-Up
Craftsman Garage Door Keyles entry
| | |
Posted by
fourfingers (
My Page) on
Fri, Aug 31, 07 at 11:52
| I have a Craftsman 1/2 horse GDO model 41A4315-7D and a Keyless entry keypad model 31D302A. I am trying to change the code but am unable to. The keypad only has numbers 0-9 and no ENTER button, so I can't push the button on the opener and walk to the keypad, enter the new 4 digit code and push enter, because there is no ENTER button. I have the code from the previous owners but would like to change it to my own code. Any ideas?
- Fourfingers |
Follow-Up Postings:
RE: Craftsman Garage Door Keyles entry
| | |
| Does this keypad have wires? |
RE: Craftsman Garage Door Keyles entry
| | |
| Yes, it has wires that go through the wall and plug into a wall mounted push button door opener. I took a small plate off the front and it has a 9 volt battery and a switch that says PROGRAM and OPERATE. Would I have to switch this to the PROGRAM mode to change the code? |
RE: Craftsman Garage Door Keyles entry
| | |
| Good here we go. To program the keypad, first unplug the garage door opener from the electrical outlet. Flip the operate/program switch to program. Next, enter your desired four digit PIN number into the keypad. Slide the switch back to operate and plug the garage door opener back in. The keypad should be programmed. |
RE: Craftsman Garage Door Keyles entry
| | |
Yes, it worked beautifully !!
Thanks !! |
RE: Craftsman Garage Door Keyles entry
| | |
| Worked for me too. Thanks much |
Post a Follow-Up
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in.
If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.
