Return to the Garages/Workshops Forum | Post a Follow-Up

o
Craftsman Garage Door Issue - Security+ Light Feature

clip this post email this post what is this?
see most clipped and recent clippings
Posted by hoosier77 (My Page) on
Sat, Aug 9, 08 at 0:00

Regarding my Craftman GDO Model 139.53914D, the Security+ Light feature is disabled and I cannot get it to work. It has never worked. I have tried the instructions in the manual; it says to reactivate; press the light button for 10 secs and the light shuts off and then sometimes back on (not all the time). So when the door is opened and the lights shut off automatically, I try to walk between the sensor to break the beam, the lights do not turn on. Once I cross the beam I noticed that the learn button blinks 4 times. I have realigned the sensors, tried unplugging the unit and resetting, and still nothing (Still blinks 4 times)...I accidentally left my garage door open over night and someone stole my set of golf clubs and some tools....PLEASE HELP.

Thank you,

Shawn Knotts

Follow-Up Postings:

o
RE: Craftsman Garage Door Issue - Security+ Light Feature

clip this post email this post what is this?
see most clipped and recent clippings

First of all you must have a wall control with 3 buttons. If you don't this feature will not work.

To have your lights come on when you walk into an open garage you must START with the lights ON. If you don't want that feature and you want to turn it off, you must start with the lights OFF.

To turn the feature on, turn the lights on manually with the wall switch, then press and hold the LIGHT button for about 10 seconds until the motor unit light bulbs flash.

Now, if the light bulbs are on. manually turn them off and then walk out through the open door. The light bulbs should come on. To disable this feature start with the lights OFF and everything else is the same.

o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garages/Workshops Forum

Instructions

  • You must be a registered member and logged in to post messages on our forums.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • It is illegal to post copyrighted material without the owner's consent.
  • HTML codes are allowed in the message field only.
  • No advertising is allowed in any of the forums.
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.



 
Click here to learn more about in-text links on this page.