|
Mon, Jul 21, 08 at 23:21
| My garage door closer will not shut all the way. It goes down almost to the foor and then goes back up. When I stop it, it blinks about ten times. I have ensured the sensors are lined up for the entire time by obserivng the indicator ligh and it stays bright and solid green, I have adjusted the down pressure setting, I have manually opened and closed the door. It will close and stay shut if I hold the button down until it reaches the floor. Any ideas? I am frustrated |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Tue, Jul 22, 08 at 10:44
| Anytime the door reverses to the open position and the lights flash 10 times it is a sensor problem. Sometimes the sensors are misaligned just a bit and it will turn on the light of the receiving sensor but will not satisfy the brain of the unit. Tweak them just a bit and try. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.