|
Wed, Jul 18, 07 at 21:41
| First off thanks to who ever can help me. I have a 3/4 horse craftsman model number 139.53924. Got home today door opened 3/4 up, then slammed down shut. Went into garage hit button, motor just grinds turning the drive screw. The plate that the trolley attaches to locks in place, but when the door is fully closed or open the plate pops out of track. Did a pin break? Or What might it be. Motor and screw seem to be fine, trying to not replace whole unit, please advise. Thanks, Justin |
Follow-Up Postings:
|
| How is the door balance? Is the door heavy? Sound like the carriage is stripped out. If you still have your owners manual you can look up the part number for the carriage or call the 1-800 number on the back of the manual and get a hold of tech support and order a new carriage. The carriage is plastic so door balance is critical in getting more life out of it. Make sure the door is balanced correctly other wise you will be doing this again in the near future. |
|
| I will try that thanks for the advise. Will let you know what happens>>> Thanks, justin |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.