|
Wed, Jul 15, 09 at 21:18
| I am looking for a replacement logic board for my sears garage door opener. My opener part number is 139 53673. Can I use a logic board from opener part number 13953600? I don't have the part number for this board.
If I reference the board part number, my board is part number 41A50213C. I found one on ebay that has almost the same number, just no "C" at the end. Can I use 41A50213? As I look around, I notice the same part number with different letters at the end. What does the C at the end mean? Thanks, Stevepd |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Thu, Jul 16, 09 at 9:21
| The last letter in that part number is the revision. If an earlier revision is used it will work but you may lose some function. A later revision is always best as there may be engineering changes that improve reliability. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.