Return to the Garages/Workshops Forum | Post a Follow-Up

 o
Keyless entry/Craftsman garage door opener

Posted by smudge48 (My Page) on
Fri, Jul 13, 07 at 20:48

I bought a Clicker universal keyless entry which is compatible with my Craftsman 1/3 HP garage door opener (model# 139.53325SRT). Unfortunately I need the dip switch code sequence, but the board is attached and I can't get to the dip switches. The garage door opener was also installed by the builder (we are the first house owners) and we don't have the Craftsman manual. Is there any other way to find out the code sequence? Or is there an online manual which would tell me how to get to the code sequence?


Follow-Up Postings:

 o
RE: Keyless entry/Craftsman garage door opener

There are no dip switches on your opener. Those were used on much older models. Just to the left of where all those white wires go you will find the smart/learn button. Press and immediately release this. Now key in your 4 digit number and press enter on your keypad. If you got the right keypad it should work.


 o
RE: Keyless entry/Craftsman garage door opener

Sorry it took so long to reply back. I finally figured out there were no dip switches when I opened the remote switch that goes in the cars. Unfortunately the directions that came in the package were not so clear. I finally went on the Clicker web site and got the keyless to work.
Thanks for your help!


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here