Return to the Garages/Workshops Forum | Post a Follow-Up

 o
Garage Door Wall Button Console - How to Open or Remove? (photos)

Posted by love_the_yard (My Page) on
Mon, Jul 30, 12 at 19:56

I have an Overhead Door Python Chain Glide, Model OCG750 garage door opener that was installed in 1995. The wall button is working only intermittently. (The remotes work fine.) My problem is that I can't figure out how to open the wall button console or remove the console so that I can test it or replace it. There are no visible screws, no obvious place where the front face plate/cover snaps on or off, nor a place to use a flathead screwdriver to pry it off. In fact, I'm not even sure if the front cover does snap on/off because I don't know how the console was originally mounted to the wall. I'm guessing there are two screws through the back plate into the wall and the faceplate snapping onto the front, but I don't want to break it if I'm wrong. Has anyone ever encountered one of these Oldie Goldies> See photos below.

Thank you so much. Any help is greatly appreciated!
Carol

Photobucket

Photobucket


Follow-Up Postings:

 o
RE: Garage Door Wall Button Console - How to Open or Remove? (pho

I got the solution from the Overhead Door company. In the interest of helping anyone else with the same problem, I'm posting it here. Squeeze firmly on either side. The front pops off - and it contains the circuit board. The back is just a plastic plate screwed to the wall. See photos below.

Sure am glad I didn't go at it with the screwdriver!

Carol

Photobucket

Photobucket

Photobucket

Photobucket


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here