firefighter1 because your problem falls outside the norm I'm giving you a number to call. 1-800-528-5236. This will get you in touch with a technical service rep at the manufacturer that specializes in Craftsman openers. They will do their best to help you. It will also help if you have the model number off the opener and your remotes and can be in your garage when you call.

Don

Thanks Don, I will give them a call and let you know how it goes.

Alright here is what I got so far. Called up the tech support floks and they had me disconnect the wire at terminal 1 and the same wire from terminal 2. She then had me check the remote to see if my problem was fixed. Still broke and she said I need to replace the logic board. Now I am going to see if I can get one for a good price and I will let you guys know how it goes. Hopefully this will fix it. Thanks for the info Don, and I hope this helps anyone else with the same problem.

Well it is finally fixed. What a pain it was to get the part. I found a place that a Garage Door repairman told me I can get the part. They never answered their phones so I finally drove over and got the part. My logic board was part #41A5021-4F, and I couldn't get that one but the suitable sup was 41A5021-1I. Get it home and it doesn't have the light socket and it is a different shape because it is made for a liftmaster. So I am upset. Then I start looking at the boards. Hey I can swap the boards. So I did that and reprogrammed the remotes and all is well again except I only have one light. The board has the capability to support it I just need to solder in the wires for the light bulb socket and I will be really good. Hope this helps anyone else with a similar problem. It was all very very easy to do, so don't be afraid. The board was $70.00 after tax. While I was up there I adjusted the belt tension, it was a little loose.