|
Tue, Jul 5, 11 at 17:32
| **********
trying to program some remotes on my sears craftsman 1/2 hp chain drive garage door opener and the LEARN BUTTON isn't blinking like it should when pressed. it stays solid for about 15 secs then goes out. i think the logic board might need replacing. thoughts? thx, --cgl61
|
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Wed, Jul 6, 11 at 16:25
| Logic board for sure. |
|
| Hello i also have an crraftsman door opener green learn button and its doing same thing...sooo that means that the logic board is bad.??? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.