Return to the Garages/Workshops Forum | Post a Follow-Up

craftsman sensor issue

Posted by gardenrich (My Page) on
Sat, Jul 27, 13 at 16:27

one sensor was only orange and the other blinking green- like a dope after 15 minutes of profuse sweating i figured (without reading this forum) - now i know- i cut both wires hoping it would not be needed but now i see how dumb i am- can i now strip them and splice back so they can possibly work?

Follow-Up Postings:

RE: craftsman sensor issue

ok so now i spliced them and power is on- but the one sensor only remains orange and the good one is green- on occasion the orange one sometimes flickers- i put them eye to eye what is problem

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here