|
Sun, Jul 22, 07 at 16:18
| Today my model 139.18060 Craftsman Opener opened twice on its own and closed once on its own. This is the first time this has happened. It is a warm and humid day but the opener has seen worse. Has anyone else had this problem? Are they prone to this or am I the subject of a prank? |
Follow-Up Postings:
|
- Posted by homeowner99 (My Page) on Sun, Jul 22, 07 at 21:46
| I have a craftsman garagedoor opener and the door moves only about 6-12 inches before reversing. The motor light flickers about 8-10 times. The sensor eye lights seems to be aligned as both the lights are lit green. Of late the wall switch light has been flickering constantly. Any inputs would be appreciated. The model number is 139. something Thanks |
|
- Posted by don_1_2006 (My Page) on Mon, Jul 23, 07 at 13:47
| Mannoli. There are a couple things suspect when this happens. The wall control can go bad and cause this and the wiring from the wall control to the motor sometimes has a staple cut through the insulation and causes the same thing. You can remove the 2 wires from the back of the wall control to eliminate the button and then you can remove the 2 wires from terminals 1 and 2 to eliminate the wiring. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.