|
Mon, Jul 13, 09 at 15:46
| I have craftsman opener model #139.536745SRT2.standard control console.With 2 remotes.I can only program one remote to work.I reset system by holding in learn button.until system resets.I can then program one remote to work, but cannot program second remote.when I push large button on second remote I get no response on opener unit.I can reset system and get either remote to work alone but can not ever program second remote.They were working until I reset system when trying to get outside cypher lock to work.Any ideas? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Jul 13, 09 at 18:37
| I think one of your remotes has reverted to an earlier technology and they will no longer work with each other. One of them should work with the wireless keypad and the other will not. If this is the case you need to replace the one that will not. Make sure you get the same model or you may run up against this again. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.