|
| Hello All:
Great forum. I have two questions about my craftman 139.53962SRT garage door openers. I'll post the second one in a seperate note. I have a two bay garage with two openers. On one of my doors, when using the remote or the fixed button in the garge, the door will go down about 1-2 feet and then automatically reverse to the fully open position. Once returned to the open position the two light bulbs on the side of the motor will click on and off for a period of time. If I hold the fixed button inside the garage down the door will fully close but if I let go the door retreats back to the fully open position and the lights blink. I disconnected the door from the track and it moves freely up and down. When closing manually half way down the door will the allow gravity to take over a close by itself. The spring looks good. I have no idea what is going on but at least once today it worked fine. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Sat, Jul 5, 08 at 15:00
| You have a door sensor problem. Make sure they are pointed directly at one another and the small light on each one is lit. |
|
| None of the remotes for my 139.53962srt (same as above) are working and neither is the keyless remote I set up. The button on the inside wall DOES work. So I'm thinking the radio board or logic board is at fault. What's it mean when the green LED on the wall button blinks at 2 or 3 times/second all the time? I tried removing then reapplying power - no change. I've downloaded the manual - nothing in there about the quickly blinking LED. |
|
- Posted by don_1_2006 (My Page) on Tue, Oct 4, 11 at 9:20
| Did the problem just start after you "set up" the keypad? |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.