|
Thu, Jul 9, 09 at 15:17
| I recently replaced the drive gear. I put everything back together except the back "door" to the cover. I plugged it back in to test it before I closed everything up. It worked. I forgot to unplug it before I attempted to put the back cover on (the one with the logic board and wires). I heard a noise (kind of like a tsst) and all of the power to the unit was gone, even the doorbell opener on the wall. What have I done? Can I fix this myself or do I need to call an electrician, handyman, or both. Help!! |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Thu, Jul 9, 09 at 16:08
| Try plugging a lamp or radio into the socket to see if you have opened a circuit breaker. You also need to check the logic board for missing or burnt traces on the printed circuit board. |
|
- Posted by strouddljs (My Page) on Thu, Jul 9, 09 at 22:02
| The outlet has power. There is a black mark about 1mm on one of the raised silver dots. |
|
- Posted by don_1_2006 (My Page) on Fri, Jul 10, 09 at 17:00
| What you really need is a garage door opener technician. The little black mark doesn't sound like what you are looking for. A technician will not only repair your problem but will be able to make sure everything else is working properly. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.