Return to the Garages/Workshops Forum | Post a Follow-Up

 o
garage opener

Posted by djjunior (My Page) on
Mon, Jul 20, 09 at 14:03

I have a craftsman 1/2hp opener(10-20yrs old) and a chambelain key pad. The key pad is not working since yesterday. I checked the opener for the learner(reset) button but it doesn't have one. It only has 0-10 little switchs. How do I reprogram the keypad??


Follow-Up Postings:

 o
RE: garage opener

Try this: First unplug the garage door opener from the electrical outlet. Next remove the nameplate from the console that the keypad plugs into and locate the program/operate switch. Flip the switch to program. Next enter your desired four digit PIN number into the keypad. Slide the switch back to operate and plug the garage door opener back in. The keypad should be programmed.


 o
RE: garage opener

Ok, I'll see what happens,, thanks...


 o
RE: garage opener

I took the console(door opener switch that the keypad plugs into) off and there is no reset inside. The button is a chamberlain as well as the key pad.


 o
RE: garage opener

Found the switch and put it on program. Unpluged the opener and set my 4 digit pin. put the switch back on and pluged in the opener but still no luck. The Key Pad was blinking when I entered the PIN and stopped blinking when I switched it back on. Any thoughts???


 o
RE: garage opener

I think your keypad has bit the dust. You will find it is "no longer available" due to the age. It's time to update your opener.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here