|
Sun, Jul 20, 08 at 13:08
| I moved to a new house recently and was able to get the remote control to work for the two garage doors. However, One of my garage door recently could not be closed fully and I have to hit the button again to let it stop there before the door touched the ground. Otherwise, the door will open again. I double checked and there is nothing blocking the door to close and I can manually close the door without any problem.
I guess there might be some security features I am not aware of and I really hope that I can fully close that door. Hope someone can offer me some help or clues. Thanks, Yibing |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Sun, Jul 20, 08 at 15:18
| I'm a little confused but what I think you are saying is the door hits the floor and reverses to the open position. If this is true you need to find the 'down limit' control which is located on the side of the motor unit. Using a small screwdriver turn this control in the opposite direction of the arrow printed on the cover. You will have to tweak it a bit I am sure. Let me know if I am wrong about your problem. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.