Return to the Garages/Workshops Forum | Post a Follow-Up

Need Help On Garage Lights

Posted by ducheja2 (My Page) on
Fri, Jul 12, 13 at 11:19

I recently installed new garage lights, the old lights were dusk to dawn with sensor on the outside wall in the brick area. The new lights take a 60 -100 watt bulbs, but I am not sure if they are compatible to the old wall sensor. I first tried a 75 watt no light now I have a 60 watt incandescent still no light. Do I or can I put a screw in bulb sensor on each light or is there a bigger problem?

Follow-Up Postings:

RE: Need Help On Garage Lights

I have put black electrical tape over the sensor with success.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here