|
Mon, Jul 7, 08 at 10:51
| We purchased a new Craftsman Garage Door Keyless Entry Pad since our old one died. When trying to program the keyless pad the garage door openers were interuppted so we reprogrammed the openers and now the keyless pad won't work. How do you get all three to program together? We have the instruction manual and what they tell you to do does not work. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Jul 7, 08 at 14:17
| You must be sure the keypad is the correct model for your opener. Take the model number off your opener and that keypad back to where you purchased it and make sure you get the right one. |
|
- Posted by maryjo_maryjo (My Page) on Fri, Jul 11, 08 at 10:05
| It is the correct model, I think we are not doing something right. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.