|
Sun, Jun 4, 06 at 23:52
| My son recently purchased a house with a Sears opener. The previous owner said he never used the remote outdoor pad and had no idea what the code was.Its a older pad # 139.53776 on back. The opener has a SR code button on the rear of the opener. The pad has no # or* just numbers. How can I reprogram this ?? Help ---- Please |
Follow-Up Postings:
|
| On the back of the motor unit near where all those white wires go you will find a button. Press and immediately release this button and then walk over to the keypad and key in your favorite four digit number and then press enter. If this doesn't work the keypad has an internal battery that could be bad. If so replace it and then follow the above instructions. Should get you going. |
|
| Thanks Don I'll try that first chance I get |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.