|
Wed, Jun 29, 11 at 21:49
| I have a Craftsman � HP garage door opener circa 1998 with a 41A5021-3C logic board and 130.53681B remote control (which came with it). I put a new battery in the remote. When I push any of the three buttons on the remote, the light on the logic board flashes, but the door does not open. I have a built-in remote in one car (Honda Accord). It opens the door. Is the logic board or the remote bad? Or is it something else? |
Follow-Up Postings:
|
| Withdrawn. I found instructions that re-programed the remote at http://www.gatehousesupplies.com/sears-craftsman-garage-openers-s/410. htm. Works fine now! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.