Return to the Garages/Workshops Forum | Post a Follow-Up

craftsman garage opener

Posted by Ronwj (My Page) on
Thu, Jun 23, 11 at 21:35

I have a craftsman 315mhz 1/2 hp opener and both remotes stopped working at the same time. The wall control light is solid and not flashing.
I tried to reprogram, both on the wall unit and the opener it's self. The overhead lights on the opener had stopped working a while ago but we adjusted. Now it appears that their flashing is required to see if programming has worked. Anyway does anyone know how to reprogram the two remotes?

Follow-Up Postings:

RE: craftsman garage opener

Sounds like your receiver has quit working. To program the remotes do this:

Press and hold the button on the remote while you press and immediately release the smart/learn button. Do this for each remote. If this doesn't work your logic board is bad.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here