|
Fri, Jun 29, 07 at 21:25
| The opener was installed last year in May. IT works but the lights remain on and can't be turned off nor does the time delay work. Had to unscrew the bulbs. I took off the side with the logic board. Is there a part to replace or check? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Jul 2, 07 at 16:39
| I'm not sure this will work in your case but there is a function to change the length of time the light will stay on. Press and hold the light button on your wall control for 10 seconds. This toggles the various lengths of time. You may have a stuck relay on the logic board causing your problem. |
|
| Found out the logic board is bad. Even under 2 year warrenty, cannot get replacement part without paying for service call. Part is $95 thru Sears, service call with labor is 132, and their cost for part is $130. This opener is made by chamberlain and web price is about $75 including shipping for replacement board. Was able to renew 1 year service contract for another yr since within 3 months expiration for $39. Therefore if you can use a screw driver and disconnect plugs you can do it yourself for $200 or so less than thru sears service technician! |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.