Return to the Garages/Workshops Forum | Post a Follow-Up

 o
Craftsman Garage Door opener won't close

Posted by amlevasseur (My Page) on
Sun, Jun 11, 06 at 21:23

My neighbor has a craftsman mondel 139.53325SRT garage door opener that won't close. When I unhook the chain, and hit the button, the motor will breifly think about going down, then go all the way up to the up-limit (if not already there). The sensors are wired good, LED's are lit, and the lights don't blink when this happens. The only thing I noticed out of the ordinary is that the LED for programming remotes will blink 5 times, pause, then blink 5 times... Any help will be appreciated, thanks.


Follow-Up Postings:

 o
RE: Craftsman Garage Door opener won't close

The LED blinking 5 times is the code for "motor overload or RPM sensor". According to your statement the motor is running and the chain is moving. That leaves a bad RPM sensor.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here