|
Fri, Jun 23, 06 at 20:29
| Howdy,
My garage door opener started giving me the signal that the door had something in the path. I did not have any lights on either sensor. I replaced the sensors but I still have the same problem. Now I have lights on both sensors. The green one blinks constantly even when I try to align the sensors. The best I can do is a really fast blink like it wants to go solid. I took the green sensor off and added enough wire to get within a foot of the other sensor but still have the same problem. Any ideas? I don't want to spend any more money on it if I don't have to. |
Follow-Up Postings:
|
| Call this number and they will do their darndest to help you. 1-800-528-5236. Make sure you have the model numbers off your opener and your remotes. They look like this 139.XXXXXSRTX on the opener and just 139.XXXXX on the remotes. It will also probably help if you are at the opener when you call. This will get you to a Technical Service Representative for Craftsman openers at the manufacturer. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.