|
| I posted this once, but I don't think it took, so I'm doing it again.
My Craftsman garage door remote control will open my garage door, but it won't close it. I have already adjusted the up and down dials on the main unit, and I have adjusted the safety sensors which seem to work fine. If you block the sensor, the garage door will go up if it is going down. The manual says that the sending eye should glow orange and the receiving eye should glow green. Both eyes are glowing green. I don't know if this is what the problem is. The garage door closes fine from the door console and from the keyless entry. If anyone knows how to fix this, please let me know. Thanks!!! |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Jun 9, 08 at 10:27
| You say it won't close. What does it do? If it starts down and then reverses and the main light flashes 10 times it is a sensor problem. Make sure the receiving sensor light is not flashing ever so slightly. Try tweaking them a bit. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.