|
Fri, Jun 30, 06 at 19:15
| No owners manual. Disconnected the safety sensors. Model 41A5021-4G. Three terminal posts.
post 1: red - w/ red stripped line from wall button. post 2: white - w/ white line from wall button. post 3: black - nothing now. Have lines from safety sensors (1 line from each sensor, 2 wires each line - one w/ colored line - one is white. Where do I attach the wires from each sensor? Thank you kindly. mark |
Follow-Up Postings:
|
| The wires from each sensor should be white and white with a black stripe. Both white wires go to post 2 with that other white wire and the wires with the black stripe should go to post 3. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.