|
Sat, Jun 16, 07 at 17:00
| I just bought a house with a craftsman garage door opener. I can get the keypad to work (it came with the house) and I can get my remote to work (it came from my old craftsman opener). Not both. I go through the exact same steps that get either/or to work pressing "enter" on the keypad at the exact moment I hit the button on my remote and the opener sees neither. If I have one working and try to program the second, the second is not even acknowledged by the opener. I have been racking my brain on this for 2 days!!! Am I having problems with these because they are different frequencies??? Keypad is FCC ID HBW1216 and remote is HBW1136. Any help offered is GREATLY appreciated!!! |
Follow-Up Postings:
|
| Are you trying to just program one remote or several? The answer to this question will help determine what's going on. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.