Return to the Garages/Workshops Forum | Post a Follow-Up

 o
SEARS 1/2 hp garage door opener

Posted by cobwabo (My Page) on
Sat, Jun 24, 06 at 16:45

I closed my garage door and once completely shut, it began to open again. It goes up to about the 3/4 point and stops. My sensors are not loose. When I put my hand over the sensor, the sensor green light goes off on one but the other sensor green light will not go off. What do I need to do to make it function normally again?


Follow-Up Postings:

 o
RE: SEARS 1/2 hp garage door opener

First thing I would do is look closely at the door springs. Sounds like one of them could be broken causing the door to be extra heavy. You can try disconnecting the door from the opener and testing the door yourself. It should be easy to open and close and you can judge it pretty well if your wife can do it with no strain. Post back.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here