Return to the Garages/Workshops Forum | Post a Follow-Up

Craftsman GDO - 3 flash indicator

Posted by bboehm (My Page) on
Thu, Jun 7, 07 at 16:38


My 1/2 hp Craftsman is acting up by opening and closing on it's own. I have tried clearing the codes in the remotes but that has not fixed it. I have another identical GDO for my other door and it is perfectly fine. The yellow light on the back of the GDO is flashing 3 times. Anyone know what this code represents?



Follow-Up Postings:

RE: Craftsman GDO - 3 flash indicator

That code is a shorted wall control. I would remove it from the wall and then remove the 2 wires. (remember where they go for the new one) Should eliminate that problem.

 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!

Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.

Learn more about in-text links on this page here