Return to the Garages/Workshops Forum | Post a Follow-Up

 o
Craftsman Garage Door Opener Problem

Posted by jqe3000 (My Page) on
Mon, Jun 26, 06 at 16:15

After pressing the inside garage door opener button, the garage door goes up only 2 ft, then stops. A next push of the button sends the door successfully back down, closed.
Multiple trys produces the same result: partway up -- all the way down. (Model 41A4315-7C) Nothing is blocking the doorway sensor and all machinery and connections are intact. ANY SUGGESTIONS?


Follow-Up Postings:

 o
RE: Craftsman Garage Door Opener Problem

First of all take a good close look at the springs at the door. Make sure one of them has not broken. If ok, there is a control at the rear of the motor unit called the 'up force'. Turn it a quarter turn and try. Do not adjust the 'down force'.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here