|
Fri, Jun 10, 11 at 14:01
| When I close the garage door, the right side does not close flush with the floor. The opener is not mounted in the middle, but about 1/3 of the way on the left side.
I can easily push the right side down and it is perfect. I didn't know if the adjustment screws would address this issue, so I figured I'd ask some experts. Thoughts??? |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Fri, Jun 10, 11 at 16:30
| Adjustment screws will not address this. If your door has torsion springs the opener can be installed within 2 feet of the center of the door. If your door has extension springs the opener must be installed in the center of the door. You should correct the installation and then go from there. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.