|
Sat, Jun 16, 12 at 13:12
| Sensors worked when I disconnected them! LiftMaster opener. Connected whites to 2 and blk/wht to 3. Green lites are on. The door won't stay down. I noticed that one green light goes out if I interrupt the light path between the sensors, but the other one stays on all the time. Do I need to adjust sensitivity? Recommendations please. Thx! |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, Jun 18, 12 at 9:48
| There is no sensitivity adjustment for the sensors. The lights are working correctly. Does the main light in the motor unit flash 10 times when the door reverses? What was your original problem? |
|
- Posted by don_1_2006 (My Page) on Mon, Jun 18, 12 at 11:24
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.