|
Wed, Jun 27, 12 at 9:43
| I have an old Crawford 1/3 HP Model Number 41A3039. Yesterday it just stopped working. No sound, nothing. Not by remote, not by wall panel. It is old, it has no safety sensors. When I use eth remote or the wall panel the light does come on. So I know it has power. But I hear nothing.
With a previous opener with a similar problem hitting the reset button helped (I think), but on this one I dont even see a reset button. Any ideas? Thanks. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Wed, Jun 27, 12 at 11:55
| Was/is the door stuck in the open position? |
|
| No closed. I released the door from the chain now so I can open and close it manually. |
|
- Posted by don_1_2006 (My Page) on Wed, Jun 27, 12 at 15:31
| I would take the cover off the motor housing and look around for a loose wire. Check the start capacitor for leakage. You can even pull the logic board and check for burnt or missing traces on the printed circuit. Beyond that you are pretty well stuck. The logic board is no longer available and the motor is way too expensive. I think it's time to upgrade. |
|
| I took a look inside it. I see no obvious loose connection. Its a 20+ year old opener and is noisy as hell. This may be a good excuse to replace it. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.