|
Thu, May 17, 07 at 23:06
| I found a bad relay on the logic board of my Chamberlain 7220 opener. It's a G5L-UA006000 relay that had a burnt contact which I cleaned and was causing the motor to keep running. The unit is now functioning properly but I would like to replace the Omron relay but they no longer list this part number. The relay has 4 pin 1,2,4 and 5 with a rating of 5a250vac and 5a24vdc with a 24vdc coil. Does anyone know what relay I can use in it's place? Omron thinks a G5LE-1A4-DC24 is equal but they have no cross reference. I have no schematic so I am not sure if this is SPST NO or SPDT. If I could get the same relay it would not be a problem. The G5LE relay has 5 pins opposed to the original 4 so I think if I clip the number 3 contact pin it may work the same but this is a guess. |
Follow-Up Postings:
Post a Follow-UpPlease Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.