|
Wed, May 21, 08 at 21:20
| I have an old Craftsman 139.525, and the vacation button light is on which has deactivated the remotes. Is there a special trick to turn the vacation light off? I've been in the garage for hours pushing the buttons, holding down for 10 seconds, etc. to no avail.
Any help would be greatly appreciated!
|
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Thu, May 22, 08 at 16:39
| This is normally done by holding the lock button in for 3 seconds. If this doesn't work you could have a bad wall control. Try disconnecting it and if your remotes still don't work you can reprogram them. To do this, find the smart/learn button on the back of the motor unit. Then hold down the button on the remote and press and immediately release the smart/learn button. Do this for each remote. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.