Return to the Garages/Workshops Forum | Post a Follow-Up

 o
Garage Door Opener Problem

Posted by jimr24 (My Page) on
Tue, May 15, 07 at 19:52

I have a 1/2 HP Craftsman GDO. I just replaced the worm gear and now the door goes up and hits the frame of the opener and stops. It makes a humming sound and locks in place.

Any ideas on what adjustments need to be made. Also, is there a way to restore the factory settings on the opener?

Thanks in advance for the help.


Follow-Up Postings:

 o
RE: Garage Door Opener Problem

On the side of the opener you will find 2 holes. One is the 'down limit' and the other is the 'up limit'. Turn the 'up limit' several turns in the opposite direction of the arrow printed on the cover. You will probably have to adjust the 'down limit' also. There is no way to restore the factory settings. They wouldn't be right for your door anyway.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here