Return to the Garages/Workshops Forum | Post a Follow-Up

 o
craftsman opener / remote keypad issues

Posted by hodges (My Page) on
Tue, May 27, 08 at 14:14

I have a Craftsmans garage door opener with 2 remote openers and 1 keypad entry mounted outside the garage door. The problem I am having is I can get both garage door remote openers to work but not at the same time. When I get the 2cnd one programmed the 1st one don't work anymore. And I cannot get the keypad to work at all. I have the book and the instructions for reprogramming seem pretty easy but it's just not working. The keypad worked fine before I started messing with the remotes.

Any ideas ??

Opener Model # 139-53674srt2
keypad model # 139-53684

Thanks,

D


Follow-Up Postings:

 o
RE: craftsman opener / remote keypad issues

Did both remotes ever work?


 o
RE: craftsman opener / remote keypad issues

I can get them both to work now but not at the same time. I cannot say for sure that both ever worked at the same time. I think that they did when I 1st bought the house. Then I programmed the built in button in my new truck and didn't need the other one so set it aside for a couple years. Now the truck with the built in button is gone and I need the 2cnd remote again.


 o
RE: craftsman opener / remote keypad issues

There is a problem where a remote will quit rolling the code and will cause the problem you have. You can usually tell which one it is because it is the one that will not work with the keypad and the other one will. But----you say your keypad is also not working. Try programming the keypad again and make sure you press and immediately release the learn button on the motor unit.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here