Return to the Garages/Workshops Forum | Post a Follow-Up

 o
Craftsman Garage Door Problem

Posted by mbrownone (My Page) on
Thu, May 2, 13 at 13:18

Hi, I am new to the forum and had a question that would be of much help. I replaced the drive gear on my garage door opener due to a common problem with the teeth being worn down. Appeared simple enough and have it put back together now. The problem is that nothing happens when I press the single button control on the garage wall and I still need to manually open and close the door. The only movement of the drive and system is after I unplug a white "lego-looking" connector. There are about 4 prongs which connect into it. Seems odd that the motor will run with it disconnected, but not after I connect it back again. Can anyone shed some light as to what is happening?? How can I correct this?? Thank you.

This post was edited by mbrownone on Thu, May 2, 13 at 20:57


Follow-Up Postings:

 o
RE: Craftsman Garage Door Problem

Have you tried their 1-800 phone number? They seemed to be familiar with common problems and their solutions when I had to call a few years ago.
YMMV


 o
RE: Craftsman Garage Door Problem

I may end up calling when I locate the number. I've been able to make the motor work but the door only moves about a foot then retracts again. Feeling like its a tension or other setting which was changed (unintended) during replacement of gear drive. Thanks for your reply.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here