|
Sat, May 3, 08 at 12:50
| Here's a good one: my Craftsman garage door opener won't work with any of the remotes. When I press the remote button, I can see the "receive" light on the back of the opener flash, so I know the problem is not in any of the remotes. Any thoughts on how to repair this?
BTW, it works fine with the wired switch. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Mon, May 5, 08 at 10:57
| Make sure the lock function on the wall control is on. If the light in the wall control is flashing press and hold the lock button for about 3 seconds. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.