|
Sat, May 1, 10 at 10:49
| Hi i need help. Please do not respond to tell me not to do it, I live 50 miles from town. my door is stuck open and i want it to close. the wire to one of the electric eyes broke off right at the housing of the electric eye. So the door will not close. Can you bypass this.
Thanks |
Follow-Up Postings:
|
- Posted by creek_side (My Page) on Sat, May 1, 10 at 21:11
| I would just pull the emergency release and operate the door manually until I could get a new sensor. |
|
- Posted by don_1_2006 (My Page) on Mon, May 3, 10 at 12:24
| You can't bypass it but you can hold the button down on the wall control until the door closes. You must time this just right by releasing the button at the right moment but it is doable. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.