Return to the Garages/Workshops Forum | Post a Follow-Up

 o
Craftsman Garage Door Opener

Posted by buffy4444 (My Page) on
Wed, May 5, 10 at 8:59

I don't have all the details in front of me, and I'm not sure it even matters if I have the model number or horsepower information. If it does, then please let me know. First off, I'm helping my husband troubleshoot this problem (as he knows more about garage doors and I know more about posting to forums) :)

The problem is pretty basic. We have an outside keypad that intermittently works. We also have two remotes that intermittently work. My husband told me his opener would work if he stood inside the garage, but not outside the garage. He re-programed everything and it worked last night, but then not this morning (both the keypad and the remote). Any ideas??


Follow-Up Postings:

 o
RE: Craftsman Garage Door Opener

Have you changed the batteries in the remotes and keypad? That's the first step.


 o
RE: Craftsman Garage Door Opener

Yes, he has changed the batteries. In fact, he got it working last night - remotes, outside control panel, etc. and the next morning. NADA! The remotes wouldn't work and neither would the outside control panel.


 o
RE: Craftsman Garage Door Opener

Could be an intermittent receiver problem on the logic board. It could also be intermittent interference. If there is strong interference, moving the transmitter (the remote) closer to the receiver would overcome it.

Interference can come from many different sources, only some of which are likely to be under your control. See if you can find any correlation between the times the problem occurs and any electrical device that may be on at the same time, including lights.


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here