Return to the Garages/Workshops Forum | Post a Follow-Up

 o
Reset garage door motor signal

Posted by zenwarp (My Page) on
Fri, May 26, 06 at 6:52

My wife has a remote built into her Land Rover Discovery. I think you call it a homelink. She divorced me and the house is mine now. How do I reset the signal in the motor so her car can't open the garage door? How do I change the key-pad number on the outside of the door so she can't use that either? I use a small remote that has a red light and a row of switches in side of it. The unit is a craftsman 1/2 hp. The number on the back of it is HBWO777. It also has one green button and one green LED on the back of it.
Thanks


Follow-Up Postings:

 o
RE: Reset garage door motor signal

On the back of the motor unit near where all those white wires go you will find a button. Press and hold it for 6 seconds. At this point none of the remotes will work including the keypad. Now to program your remote, press and hold the button on the remote and then press and immediately release the button on the back of the motor unit. This will get your remote going. To program the keypad, press and immediately release the button on the back of the motor unit again and then walk over to the keypad and key in any 4 digit number and press enter. You will be set.


 o
RE: Reset garage door motor signal

Thank you so much :)


 o Post a Follow-Up

Please Note: Only registered members are able to post messages to this forum.

    If you are a member, please log in.

    If you aren't yet a member, join now!


Return to the Garages/Workshops Forum

Information about Posting

  • You must be logged in to post a message. Once you are logged in, a posting window will appear at the bottom of the messages. If you are not a member, please register for an account.
  • Please review our Rules of Play before posting.
  • Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review your post, make changes and upload photos.
  • After posting your message, you may need to refresh the forum page in order to see it.
  • Before posting copyrighted material, please read about Copyright and Fair Use.
  • We have a strict no-advertising policy!
  • If you would like to practice posting or uploading photos, please visit our Test forum.
  • If you need assistance, please Contact Us and we will be happy to help.


Learn more about in-text links on this page here