|
Sat, Apr 12, 08 at 20:30
| I have a Sers Craftsman Garage Opener and neither of the two 3-function remote controls will work recently. I replaced the batteries and have tried several times to reprogram them to no avail. I have read many problems on the forum similar to mine except that my Yellow Indicator Light will stay on for a while and not blink at all. The wall button works fine. I have tried rebooting the opener and all different ways of pushing the SRT button. Does anyone have any suggestions? Is is possibly a problem with the mother board? The unit was installed in 1997. |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Sun, Apr 13, 08 at 17:52
| The logic board contains the receiver. It most likely quit. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.