|
Wed, Apr 22, 09 at 17:50
| I have a 10 year old sears 1/2 garage opener- works great but for the last 4 years the light that goes on every time you break the plain has not worked. It comes on when the door opens then goes out after the required time. But it use to come on whenever you went past the actual opening. Other then that it works great thats the reason why I never tried to improved it. Any ideas |
Follow-Up Postings:
|
- Posted by don_1_2006 (My Page) on Wed, Apr 22, 09 at 18:29
| To have your lights come on automatically when you walk into an open garage you must START with the lights ON. To turn the feature on, turn the lights on manually with the wall switch, then press and hold the LIGHT button for about 10 seconds until the motor unit light bulbs flash. Now, if the light bulbs are on, manually turn them out and then walk out through the open door. The light bulbs should come on. To disable this feature, start with the light bulbs OFF and everything else is the same. |
Please Note: Only registered members are able to post messages to this forum. If you are a member, please log in. If you aren't yet a member, join now!
Return to the Garages/Workshops Forum
Instructions
- You must be a registered member and logged in to post messages on our forums.
- Posting is a two-step process. Once you have composed your message, you will be taken to the preview page. You will then have a chance to review the contents and make changes.
- After posting your message, you may need to refresh the forum page in order to see it.
- It is illegal to post copyrighted material without the owner's consent.
- HTML codes are allowed in the message field only.
- No advertising is allowed in any of the forums.
- If you would like to practice posting or uploading photos, please visit our Test forum.
- If you need assistance, please Contact Us and we will be happy to help.